<< Back to Products

Precision Incubator

Memmert INB 500

 Temperature : 30°C to 70°C.

 Dimension : w x h x d: 710 x 760 x 550 mm 

Features: Ventilation and Control
  • natural convection
  • continuous adjustment of pre-heated fresh air admixture
  • vent connection with restrictor flap
  • microprocessor controller with integrated autodiagnostic system with fault indication
  • one Pt100 sensor class A in 4-wire-circuit
  • integrated digital timer (1 min. up to 99 h 59 min) to switch off heating to stand-by mode
  • digital LED- display of set and actual temperature as well as remaining process time
  • resolution of display for set value and actual value 0,5 °C
  • long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB

Overtemperature protection (double)
  • in case of total breakdown of sensor, the heating is switched off at approx. 3 °C above set value
  • in case of failure of the switching element, the heating will be controlled by an additional relay approx. 3 °C above the set temperature
  • in case of a faulty sensor (incorrect measuring values) or the total breakdown of the controller the heating is switched off at approx. 10 °C above the max. oven temperature by the mechanical temperature limiter TB protection class 1
  • for very sensitive and/or valuable load in terms of being non-reproducable, we recommend ovens of our E- and P-class guaranteeing an even higher safety standard
Textured Stainless Steel Casing
  • w x h x d: 710 x 760 x 550 mm
  • fully insulated stainless steel door with double locking and 4-point adjustment
  • inner glass door
  • rear zinc-plated steel
Interior - Heating Concept
  • w x h x d: 560 x 480 x 400 mm, 108 l
  • easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
  • 1 perforated stainless steel shelf, non-tipping
Temperature Range
  • from +30 °C (however, at least 5 °C above ambient) up to +70 °C